For this segment, you will need the following sprays:

• "Krylon" Semi Flat Black
• "Mojawk" Extra Dark Walnut
• "Krylon" Bright Silver

These can all be purchased at your basic paint store and/or Home Depot. The
brand names may vary but the type of paints are similar. Mohawk products can be purchased
online at the link below:
http://www.mohawk-finishing.com/catalog_browse.asp?ictNbr=170

1. You should have sprayed the entire gun with "Krylon" Semi Flat Black already to
start. I used a sock to apply the silver highlights. I cut the end off of it and sprayed "Krylon" Bright Silver directly
on the piece of the sock.

 
2. Apply the silver to the "proper" areas of the gun. Do not spray too much silver on the
sock. You can always add more silver if there is not enough.

3. Spray the areas where you have added the bright silver with the "Mohawk" Extra
Dark Walnut. This reduces the look of "freshly" scratched to that of "oiled steel that has
blown away a bunch of Jedi scumbags". Ahem. That's it!